Відео

Thanks for the video Kevin! I just got my Pi kit and I can't wait to put it together. It will be much different than ZoeTheRobot.

Thanks for these videos. Looks like you've done 3 parts in the learning Micro Python series. Have you considered doing more? These really cover the absolute basics and it would be really great to see s few more videos that jump into more intermediate & advanced topics. Things like interrupt handling (and +/-s vs polling), more sophisticated looping options, greater peeks into available libraries and when best to use them, differences and comparison between Micro Python and CircuitPyhon, etc.. Lots of different options for digging deeper that I think could help lots of makers. Hope you'll consider expanding this video line. Thanks.

Chatgpt directed me here

👍👍👍👍

I just ordered one of these. You have to be careful about the battery though. Some of the 18650 batteries have a protection circuit built in. It only adds a couple of mm but just enough that the battery will not fit into the Cutebot Pro. I have 3 18650 batteries that will not fit. I should have my shorter battery today. Previously, I would say the only robot to get for high school education would be the DFRobot Maqueen Plus V2. I might like this one better. The Maqueen has 3 IR line sensors across the front. (2 farther back) Cutebot Pro has 4 across the front. The reason I like the Maqueen is they can report the IR sensors as a gray scale (0 - 255). It looks like the Cutebot Pro can also do that. You need that to implement a PID control line following. At the high school level you want that extra challenge over bang-bang line following. In fact Cutebot Pro has an error function built in. It returns -3000 - 3000 depending on how far off the line the robot is. Cutebot Pro also has the motor encoders. This is huge. It opens up several interesting projects that can be done. And finally, Amazon has it in stock. It is so much easier for schools in the USA to get it because Amazon knows how to fill out the proper tax forms.

anybody looking for the switch, you have to turn on the library switch-omron for the 10-xx, Switches (TE) for the second one

24:31 why does the display show 2 ip addresses? How is that possible?

Very nice but still no camera breakout. So, IMO not worth the price doubling and especially since it's Gen2 NVMe.

Popping through the video now, I have one on the way and would like to see if the sum is greater than the parts!

Hi I keep getting stuck it gives me a curl error after going cd into documents

Sir, thank you for the great explanation. I learned something I didn’t know again. Thank you.

Hi, looks interesting, can this AI Kit also work with a stream from an IP-cam?

I got a 8 GB raspberry pi 5 today at micro center I got the basic Cana kit with 128 GB SD card

Hey I got one of these but was disappointed you can't use it with PyTorch or llm models or other models without some weird recompiling but they don't provide the full sdk. So if you wanna train something to find a squirrel for example, I don't see any way. In the mean time it's just a simple toy to run some of their demos. Unimpressive imo. I think the coral is better since it's easier to get it to help with tasks..

Bro really gave his dog underglow💀

I'm really hoping for a part 3

Hi tried so many times but without good results it came error no module name cvzone why?

Will you please also make an video for an pico w Bluetooth HID device ? couldn't find any info for it. Great video and thanks a lot

i thought I was fat...very cheerful chap.

very cool !!

This is so cool! I just bought all the parts and am working on building the robot now with my 5 year old son! Having a blast! Quick question. Does the current chassis file have the shim fix that you were talking about at 16:41? Thanks so much for all you do!

Great tutorial video. Concise & precise, but easy to follow. Big thank for your content.

Hey, is it possible for the remote also to receive data from the bot? So both devices could read and send data? Try it for a few days but without success... Although your code is great and helps me out pretty good<3 greetings from Germany

you are a legend man! the vdos are so unique and procedural! like them very much

I'm interested in detecting ArUco markers and getting their pose estimates. Is that something this AI chip can do well? Would you still need to run something like OpenCV on it? I've never used AI specific hardware so not sure how it works.

This video was epic, thanks! Kev, dude, you're incredibly thorough, and you don't make any assumptions about the watchers understanding of the various technologies. I appreciated the explanations of each command along the way. This was a proper tutorial, and not simply a how-to. I'm looking forward to watching the rest.

Great content - super helpful! This was working great for my Wemos D1 minis until I reset my laptop and downloaded the latest version of Thonny. This is fairly reliable with Thonny 4.0.0. When using 4.1.4 I got through the install and then the onboard led would blink rapidly and not stop. Thanks - been back to rewatch this video many times when something is not working exactly as I remember it.

Tks for this tutorial, I've a question, do you know if is possible to build a DNS with a library in micropython?...is for not use the IP address

Is it possible to use this technology to control a UAV so it can be autonomous without GPS? Maybe have it detect objects like buildings mountains lakes etc that it has seen a picture of prior? Where you can use identifiable objects as waypoints that you programmed in prior. I'm a total noob and wonder is there's a name for this idea so I can explore it further?

Thanks Kevin! Just got my Alvik today and watched your video to get up to speed.

Is it possible to install both the Acceleator and an SSD?

Thanks for the video. I got one of these kits and it is amazing when running the provided sample codes/apps. Pity to program something leveraging on this kit you need c++, the installation of the Hailo SDK and then it becomes very complicated for 99% of the people using a Pi. I would not recommend the AI Hailo kit for everyone. It is for developers with good knowledge of AI and c++. There is not a single video explains that, all video on UA-cam just try to market it, I have not found any tutorial explains how to modify or make a new app. At present, if yogurt one of these kits you will be on your own.

I don't think Alvik is worth 130€. It does have many features for a small package, but the price is just unfair. For just 80 dollars, you can get a robot that both drives faster, has block coding as well, has a camera mounted and is more open, meaning you can modify it easier, and learn more on the way.

❤❤❤❤❤🎉🎉

I just got a milk-v meles and managed to get it to boot...(it won't power on using the raspberry pi 5 power but will from just a usb from my pc....) I think this RISC-V has potential but the OS support is lacking right now and RISC-V really needs some love from the open source community. I was hoping ubuntu had something already but they only have a broken version for Milk-V mars that the wifi won't even work... Yet... I think hobbiests are going to love this stuff!

I'm quite interested in seeing its performance running LLMs via Ollama. With a RPi5 alone, it takes vision model LlaVa about 5 whole minutes to interpret an image. I'm hoping the AI kit can improve that vastly! Have you given it a go?

Is the 4gb ram raspberry pi 5 good enough for the A.I kit?

Just amazing !

You’re both much braver than me and my wife!

Anyone know why it still has the steering wheel? And is there a low top speed?

awesome, but what if something wrong like bug or error system during the trip :"

I'd be scared out of my wits if I rode in a driverless taxi. 🥴

Natural fitting for this channel. 😊 Also Jaguar!!!

Brilliant! Who's cleaning it? Haha! 😂 We need these ASAP in the UK!

:)

I wanted to ride one so bad! But I didn’t get an access code in time 😢 🤞next time.

It needs a bit of interaction at the end of the ride, I'm British and like to be polite and say thank you...even to Alexa.

Of course, you couldn’t resist trying the driverless taxi, Kevin! But how did you talk your wife into it? Enjoy SF!